Marley Qmark Electric Heaters - Fan Wall Heater - QFG
The Qmark QFG Series electric wall heaters are suitable for use in almost any room. Qmark QFG Electric Space Heaters are efficient and do not take up any floor space as they are installed in the wall and use a whisper quiet fan to move air around the room. Use single wall heaters in smaller rooms such as bedrooms and bathrooms. Use multiple Qmark Electric Heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms. Wattage should be determined through heat loss calculations and come in 120-volt or 220-volt models.
The Qmark QFG CLIP-N-FIT FEATURE allows the installer to change the wattage of the wall heater to a lower output without moving jumper wire. Each QFG electric wall heater is factory wired for its maximum wattage. To change wattage, clip out either jumper 1 or 2 as shown in the installation manual for desired wattage. This patented Clip-N-Fit feature also prevents the operator to change wattage after installation to a higher wattage.