|
|
Cart (0) Search Customer Info Email Us |
|
Activent Installation Information
Activent Installation Manual - click here Return to Activent Main Page |
1. The Activent package contains 3 items; The Activent louver system, Activent louver cover
and a Remote Temperature Control (RTC).
2. Matching the Activent and RTC combination codes. Locate the combination code switch on the Activent louver system and the RTC. The combination code is set by aligning a series of 5 micro switches. Slide the micro switches with the tip of a ballpoint pen to match that of the RTC. 
3. Gently pry the old register from the opening. 
4. Remove the old register and set it aside. 
5. Here is the opening. We measured previously and selected the proper vent assembly. 
6. Insert Alkaline Batteries into Activent: remove the grill cover from the Activent louver system, slide the battery case latch to the open position while pulling gently on the warning label. The battery case should come out easily. 
7. Insert the Activent and screw down in place. 
8. Snap the magnetic cover over the Activent. 
9. Select a location (preferably across the room from the Activent unit) to mount the RTC. Mount the RTC at approximately shoulder height using the 2 screws provided with your RTC (a wall template is included at the end of this instruction sheet). The RTC may also be placed on a dresser or night stand (remember to keep the RTC away from the air flow of the Activent so proper operation will occur). 
|
|
Return to Activent Main Page |
|
